null

Interior Wrap Size Guide

Kitchen Wrap Sizes

How to Measure for Interior Vinyl Wrap

How do I measure my kitchen cabinets for vinyl wrap?

To measure your kitchen for vinyl wrapping, you can use our standard cabinet estimation method or measure exactly by linear meters.

  • Small Kitchen (Approx. 10 Meters): Covers about 8-10 standard cabinet doors or drawers.
  • Medium Kitchen (Approx. 15 Meters): Covers about 12-15 standard cabinet doors or drawers.
  • Large Kitchen (Approx. 20 Meters): Covers about 18-22 standard cabinet doors or drawers.
Pro Tip: Always order 1-2 extra meters for mistakes, complex cuts, and wrapping the plinths (kickboards) and end panels.
How do I measure kitchen worktops and countertops for wrapping?

Measuring for worktops is very simple because architectural vinyl rolls are typically 122cm (48 inches) wide, which easily covers standard 60cm deep worktops.

  • Step 1: Measure the total linear length of all your worktop sections from end to end.
  • Step 2: Add these lengths together.
  • Step 3: Buy the next roll size up. For example, if your total length is 3.4 meters, purchase a 4-meter roll.
How do I measure a table for a vinyl wrap cover?

When wrapping a table, you must account for the surface area plus the thickness of the table edges.

  • Step 1: Measure the flat length and width of the tabletop.
  • Step 2: Add a minimum of 10cm to 15cm (4 to 6 inches) to both the length and the width.
  • Step 3: This extra allowance ensures you have enough material to fold down over the edges and neatly tuck underneath the table for a seamless finish.
How do I measure wardrobes for vinyl wrapping?

Wardrobe doors are larger than kitchen cabinets, so you will measure them by height.

  • Step 1: Measure the height and width of one wardrobe door. Standard doors are usually around 50cm-60cm wide.
  • Step 2: Since our vinyl rolls are 122cm wide, you can often fit two standard wardrobe doors side-by-side out of one linear meter of vinyl.
  • Step 3: Measure the total height of all doors, divide by two (if they fit side-by-side), and add 1 meter for wrapping the outer framework and plinths.
How do I measure internal room doors for a vinyl wrap?

To completely wrap an internal door, you need to cover both the front and the back, plus the edges.

  • Step 1: Measure the height of your door (Standard UK/Irish doors are typically around 2 meters or 78 inches high).
  • Step 2: Because you need to wrap both sides, multiply the height by 2. (e.g., 2m x 2 = 4 meters).
  • Step 3: Add 0.5 meters to allow for wrapping the edges and for trimming. Therefore, you will typically need a 4.5-meter or 5-meter roll per standard internal door.

!